Steam Rook part 2

In 3D Printing, Crafts on December 14, 2013 at 3:33 am

It’s finally printed and assembled.  I took a few photos.  The first is with the printing still in progress.  The second is assembled.  The third and fourth have primer.  It’s still a little gloppy.  I didn’t realize how gloppy it was till I looked at the second photo.  With the semi-opaque color of this spool of PLA it’s really hard to see detail until you get some primer on it.  While it was a bit messy, the model seemed to be fine so I started printing the second one right away.  I did change the fill to 30% (down from 100% on the first one).



Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: